blog post img

There's nothing more damaging than a laptop damaged that holds the most essential documents you need for school or at work. The laptop could fall apart when the laptop's screen is pressed or falls onto the floor. They are aware of the pain it causes.
It's even more complicated to deal with if you don't have backup copies of the documents you need and you have an assignment to finish or a task you have to present. Replacement of the screen might be a bad option for your budget, and you may not be confident in letting your documents go to repairmen.
Computer Repair like to provide solutions to repair the damaged laptop screen without the need to replace it.

How Can I Repair A Damaged Computer Screen?

Replaces the Protective

If the crack isn't too significant there's a good chance you're able to tell that the protective glass of the laptop is damaged. If that's the case, you're fortunate and all you need to take care of is replacing the damaged glass with a new one.

  1. Get a new laptop protector for your laptop
  2. Protectors that are damaged should be removed beginning at the corners
  3. Cleanse the laptop's display with alcohol-based or microfiber cleansers that can be used on screens
  4. Peel the film off and away from the side that is adhesive to the protector.
  5. Place it in the most exact way you can on your laptop, starting at the one end, and then press it back and forth until the opposite end.
  6. You can make use of a card to smooth out the air bubbles, beginning in the middle, and then moving toward the edges
  7. Once you're done, you can remove the film from the top.
  8. Cremes Car creams, car creams, and erasers to remove scratches

There are creams specifically designed to heal scratches caused by cars. You can use these creams to get the laptops that have been damaged repaired without the need to replace them. It is important to note that this method is only useful if cracks aren't that serious. The film is put on the laptop's display in the same way as you would apply it to the vehicle.
You can also purchase scratch erasers that utilize adhesives to secure broken optics panels to your device.

This Toothpaste Hack

It's very popular and is quite amazing even if you've never heard of it previously.
This hack is very simple and calls for toothpaste, cotton swabs, and a microfiber cloth. This hack is an excellent solution for a quick and easy hack.
Cleanse your laptop. Apply toothpaste to the cotton swab. Apply the toothpaste to the affected areas by gently pressing. Pat gently between cracks of the screen until the toothpaste is released out of the crevices. It is important to repeat the process many times. After that, clean it by wiping it off with an absorbent cloth.

Replacing The LCD Panel

If your laptop is affected to the extent that it's beyond repair and there are no "hack" works, it is essential to take the time to fix or replace the screen. If you're not eager to replace it, there's only one option to change out the LCD panel inside the laptop.
The problem could be at a different location. If you are considering replacing the LCD on the panel it is crucial to ensure that your graphics card is functioning correctly then contact  Laptop Repair in Dallas. If your graphics card is damaged, replacing the LCD panel is nothing.


The New Screen Of Lcd Will Be A Match For The Device

  • A work surface that is flat
  • A safety pin, or any sharp object, to remove small stickers that conceal screws
  • A small screwdriver with an e-head for screws.
  • A piece of plastic that is thin enough to take away the bezels
  • A container that keeps the screws in place

Then Proceed To The Next Steps In Order To Alter The Display Panel

  1. Switch off your laptop, then pull off the battery.
  2. Look for the screws that are holding the screen. Then, remove the screen using the safety pin.
  3. Covers the sticky side with a gentle.
  4. Remove the screws and place them in the storage container.
  5. Take the bezel out of the screen with the aid of a knife made of plastic.
  6. Then, you'll discover the LCD screen within the frame which is a thin piece of steel and screws. Then, take off the screws that connect to the LCD onto the frame.
  7. Take the LCD and slowly remove it. Wires will be exposed in this process.
  8. Only connect the wire that connects your computer to the screen. Be careful
  9. After you've removed it from the LCD which was before attached, take it gently and replace it with a brand-new LCD.
  10. Make sure you connect the cable connecting your laptop to your monitor.
  11. Join all screws, parts, and connections exactly the same way as when you first began and in reverse order.

With An External Display

It might be too much trouble for you, but If you're not keen to accomplish this task yourself, you can connect your laptop to an external monitor and enjoy an enjoyable experience!